40-46 GHz 33dBm High Power Amplifier


Package BW (GHz) Gain (dB)



P1dB out (dBm)

Bias Current (mA)

Bias Voltage (V) Status Process
DIE 40-46 20 33.5 33 2600 4.5 Availlable D01PH



The CGY2136UH/C1 is a high performance GaAs Power Amplifier MMIC designed to operate in the millimeter Band.

The CGY2136UH has an output power of 33 at the 1dB compression point and has a small signal gain of 20dB. It can be used in Radar, telecommunication and instrumentation applications.

The CGY2136UH is a 3 stages dual line-up architecture with lange couplers for power splitting and combining delivering excellent input and output matching.

The die is manufactured using OMMIC’s High Performance 0.13mm gate length PHEMT Power Technology. The MMIC uses gold bonding pads and backside metallization, the die is fully protected with Silicon Nitride passivation to obtain the highest level of reliability.

This technology has been evaluated for space applications and is on the European Preferred Parts List of the European Space Agency




  • Radar
  • Telecommunication
  • Instrumentation







  • Operating frequency range : 40 to 46 GHz
  • Output Psat min : 33.5 dBm 
  • Output P1dB min : 33 dBm
  • Gain : 20dB 
  • 50 Ohms input and output matched
  • S11 : < -10dB 
  • S22 : < -12dB 
  • Power Supply : 2.6A at 4.5V
  • Delivered as 100 % on-wafer RF tested dies ·
  • Samples and evaluation Boards Available ·
  • Die size = 4.3 x 5.0 mm
  • Device Availability (Q3 2012):
    • Tested, Inspected Known Good Die (KGD)
    • Module
    • Demonstration Boards
    • Space and MIL-STD MMICs


CGY2136UH High Power Amplifier Block Diagram


Application Note