Quality and Reliability

Quality : a priority

OMMIC is dedicated to providing its customers with the highest quality products and services :

Continuous improvement of OMMIC's products and services by applying a processus based on quality system and the use of Statistical Process Control throughout the company
• Innovation and Development in partnership with customers and suppliers
Motivation and training of OMMIC's staff on the use of quality tools and methods

OMMIC is working to provide a cleaner and safer environment for its staff and customers with the aim of long term sustainable growth.

• A control on substances that are rejected in the air and water
• A control and traceability of all by-products
• A control of the quantity of raw materials used thanks to the use of indicators
• A staff training on environmental health and safety methods


OMMIC has been assessed and registered as meeting the requirements of ISO 9001 and ISO 14001 since 1994 and 2002 respectively. In 2003, OMMIC was registered under the new process based ISO 9001:2000 standard and was registered as a ISO 14001:2004 supplier in 2005.
These awards underline OMMIC's commitment to both its green policy, sustainable growth and high quality.

Qualifications and Evaluations

Product Qualification : OMMIC Reliability Plan

Milestone
Device form and number
Testing conditions
Acceptance criteria
ESR
1 naked die
8h @ 25°C under biasing
0 defect after 8h
APP

36 naked dies
or
36 Packaged dies coming from 3 different wafers

Storage : 1008h @ 150°C
0 defect after 1008h
Endurance tests : 1008h @ Tj=150°C
0 defect after 1008h
Humidity tests : 1008h @ 85°C/85%RH
0 defect after 1008h
Thermal cycles : -65°C/+150°C, at least 200 cycles
0 defect after 200 cycles
RFS

36 naked dies
or
36 Packaged dies coming from 10 different wafers

Storage : 1008h @ 150°C
0 defect after 1008h
Endurance tests : 1008h @ Tj=150°C
0 defect after 1008h
Humidity tests : 1008h @ 85°C/85%RH
0 defect after 1008h
Thermal cycles : -65°C/+150°C, at least 200 cycles
0 defect after 200 cycles



To have the highest quality products and processes, OMMIC has placed reliability at the heart of its strategy.

From the development of a new technology processing module to the introduction of a new product, OMMIC continuously evaluates, monitors and improves the reliability as shown in the Product Qualification Plan.

Testing is also done to Telecom, Military and Space Standards both on the technology and on Standard, Custom and Customer Circuits.

This has enabled OMMIC to gain extensive knowledge on the failure mechanisms in different environments (bare chip, plastic packaging, hermetic packaging etc) so as to not only predict the failure rate but also ways to improve it, if necessary.

 

As part of the FAB+ service, OMMIC makes available its expertise to help customers at each stage of the design, packaging, test and qualification of his product to ensure the very highest level of quality and reliability.